BoxLED M CP G5

Product family features
  • Chain of 32 linear LED modules
  • Connected with flexible cables
  • Maximum length of one chain: 9.80 m
  • Type of protection (modules): IP66
  • CE marked, ENEC certified, UL recognized component
  • Fully integrated heat sink
Product family benefits
  • Modules are compatible with BackLED mounting profile
  • Uniform illumination thanks to optimized elliptical lenses
  • Several options for quick and simple mounting: bolting or snap-in
  • Excellent module efficacy
  • Consistent white light (Standard Deviation of Color Matching SDCM: 3)
  • Very long lifetime
  • 5 year guarantee
Equipment / Accessories
  • Several types of OPTOTRONIC and ELEMENT 12 V power supplier
  • BoxLED mounting profile BX-MP-M-CP-G5-2M
  • BoxLED cable clip BX-CLIP-M-G5

Products

Sort by:
Product
Color temperature
Color rendering index Ra
Luminous flux per LED module
Nominal wattage per LED module
Luminous efficacy
Data sheet
BX-M-CP-830-G5
3000 K >80 237 lm 2,8 W 81 lm/W
BX-M-CP-840-G5
4000 K >80 247 lm 2,8 W 88 lm/W
BX-M-CP-865-G5
6500 K >80 241 lm 2,8 W 86 lm/W

Information about Family

Ecodesign regulation information:
  • This product is considered to be a "containing product" in the sense of Regulations (EU) 2019/2020 and (EU) 2019/2015.
  • Tolerances of the reported values, are according to LED Modules Performance standard IEC/EN 62717.
  • In general, the replacement of the contained light sources without permanent damage to the product with the use of common available tools is possible in the final application when they can be dismantled from the installation environment and substituted for the necessary number of light sources restoring its full electrical/mechanical/thermal/optical functionality by means of a professional installer.
    In the contrary, and limited to the LINEARlight Flex Diffuse, LINEARlight Rigid Finesse, GINO LED Flex Diffuse and LUMINENT Milky product families, the contained light source is an integrated part of the containing product and its removal can only be done by causing a permanent damage to the containing product due to its tight mechanical, electrical, optical, thermal interaction and/or environmental protection with or from the containing product. Therefore, a replacement of the light source with the use of common available tools is not justified.
  • Dismantling of light sources from containing products at end of life: Containing products with light sources which are scalable in length can be cut to the length of the contained light source and if applicable mechanically detached from protective and/or optical covers. Containing products shall be separated from building material and/or from other additional mounting accessories by means of a professional installer.
    Separate control gear and light sources must be disposed of at certified disposal companies in accordance with Directive 2012/19/EU (WEEE) in the EU and with Waste Electrical and Electronic Equipment (WEEE) Regulations 2013 in the UK. For this purpose, collection points for recycling centres and take-back systems (CRSO) are available from retailers or private disposal companies, which accept separate control gear and light sources free of charge. In this way, raw materials are conserved and materials are recycled.

Downloads