HTM 70/230 240
- Very low power loss thanks to high efficacy
- Strain relief suitable for different cable types (HTM)
- Suitable for space-critical installation thanks to compact functional design
- Extremely compact transformer for highly space-critical installation conditions (HTN)
- Protective operation throughout the entire partial-load range for long lamp life
- Effect and accent lighting
- Living rooms
- Object lighting
- Conference rooms
- Restaurants
- Recessed and surface-mounted furniture luminaires
- Shop lighting
- Event rooms
Technical Data
Electrical data
Lamp wattage
20 70 W
Maximum output power
70 W
Line current
0.27 A
Nominal voltage
230 240 V
Power factor λ
0.99
Operating frequency
52 kHz
Nominal output voltage
11.2 V
Input voltage AC
207 264 V
Mains frequency
50 60 Hz
System wattage
74.00 W
Efficiency in full-load
95 %
Input voltage range
230 240 V
Max. ECG no. on circuit breaker 10 A (B)
37
Max. ECG no. on circuit breaker 16 A (B)
59
Galvanic isolation primary/secondary
4.00 kV
Inrush current
0.3 A
Dimensions & weight
Length
108.0 mm
Width
52.0 mm
Height
33.0 mm
Mounting hole spacing, length
-
Mounting hole spacing, width
-
Cable cross-section, input side
2.5 mm²
Cable cross-section, output side
2.5 mm²
Wire preparation length, input side
12 / 7.0 mm
Wire preparation length, output side
12 / 7.0 mm
Product weight
110.00 g
Temperatures & operating conditions
Ambient temperature range
0 +50 °C
Maximum temperature at tc test point
80 °C
Additional product data
Design / version
Compact with cable clamp
Capabilities
Dimming method
Trailing- or leading-edge phase control for inductive load dimmers
Overload protection
Automatic reversible
Overheating protection
Automatic reversible
Short-circuit protection
Automatic reversible
Max. cable length to lamp/LED module
2.0 m
Cable/wire types, input side
NYM 3x1.5 / H05VV-F 3x0.75 / H05VV-F 3x1.0 / H05VV-F 3x1.5 / H05VV-F 2x0.75 / H05VV-F 2x1.5 / H05VVH2-F 2x0.75 / H05VVH2-F 2x1.5 mm²
Cable/wire types, output side
NYM 3x1.5 / H05VV-F 3x0.75 / H05VV-F 3x1.5 / H05VV-F 3x1.5 / H05VV-F 2x0.75 / H05VV-F 2x1.5 / H05VVH2-F 2x0.75 mm²
Dimmable
Yes
Dimming range
0 100 %
No-load proof
Yes
Suitable for fixtures with prot. class
II
Intended for no-load operation
No
Certificates & standards
Approval marks approval
VDE / VDE-EMC / E1 approval / EAC
Standards
Acc. to DIN VDE 0875/CISPR 15/EN 55015/Acc. to EN 61547/EN 61047/Acc. to IEC 61000-3-2/EN 61000-3-2/Acc. to EN 55015/Acc. to EN 61000-3-2/Acc. to EN 61547/Acc. to IEC 61347/Acc. to EN 61347/Acc. to EN 55015/Acc. to EN 61000-3-2/Acc. to EN 61547/Acc. to EN 61047
Type of protection
IP20
Logistical data
Commodity code
85044095900
Environmental information
Information according Art. 33 of EU Regulation (EC) 1907/2006 (REACh)
Date of Declaration
12-06-2023
Primary Article Identifier
4050300442310
Candidate List Substance 1
Lead
CAS No. of substance 1
7439-92-1
Safe Use Instruction
The identification of the Candidate List substance is sufficient to allow safe use of the article.
Declaration No. in SCIP database
cc0c3a78-fe96-4e5d-adb2-9ec3e31d1277
Packaging information
EAN |
Unit |
Piece |
Dimension l x w x h |
Weight |
Volume |
---|---|---|---|---|---|
4050300442310 |
UNV
| 1 | 108mm x 52mm x 33mm | 110.00g | 0.19dm³ |
4050300442327 |
VS
| 20 | 270mm x 229mm x 94mm | 2377.00g | 5.81dm³ |
Downloads
Data sheets
Information about Family
- Line frequency: 50 60 Hz
- RI suppression: to EN 55015 (A1: 2007)/CISPR 15, EN 55022
- Line harmonics according to EN 61000-3-2
- Immunity according to EN 61547
- Safety: to EN 61347
- Short-circuit protection, overload protection, overtemperature protection: electronically reversible
- Electrical isolation between the primary side and the secondary side
- Dimmable on the leading edge (without HTN) and trailing edge
Separate control gear and light sources must be disposed of at certified disposal companies in accordance with Directive 2012/19/EU (WEEE) in the EU and with Waste Electrical and Electronic Equipment (WEEE) Regulations 2013 in the UK. For this purpose, collection points for recycling centres and take-back systems (CRSO) are available from retailers or private disposal companies, which accept separate control gear and light sources free of charge. In this way, raw materials are conserved and materials are recycled.
Products
Product |
|
|
|
|
|
Data sheet | ||
---|---|---|---|---|---|---|---|---|
![]() |
HTM 70/230
240
|
52.0 mm | 33.0 mm | Yes | 230 240 V | 20 70 W | ||
![]() |
HTM 105/230
240
|
52.0 mm | 33.0 mm | Yes | 230 240 V | 35 105 W | ||
![]() |
HTM 150/230
240
|
54.0 mm | 36.0 mm | Yes | 230 240 V | 50 150 W | ||
![]() |
HTN 75/230
240 I
|
33.0 mm | 22.0 mm | Yes | 230 240 V | 20 75 W |