IT FIT 60/220...240/1A2 CS L
Product family benefits
- Flexible with 1 driver offers 4 output currents
- High quality light with very low ripple
- Very high efficiency up to 87%
- Enable slim fixture design with flat 21 mm height metal housing
- Long lasting and high reliability
- SELV driver
Areas of application
- Linear and area lighting
- Office, industrial and shop lighting
References / Links
* For more information on the multi-level guarantee and the terms and conditions of the guarantee visit https://www.inventronics-light.com/multilevel-guarantees
Technical Data
Electrical data
Nominal input voltage
220…240 V
Mains frequency
50/60 Hz
Input voltage AC
198…264 V
Current set
DipSwitch
Power factor λ
0.83C…0.98
Efficiency in full-load
87 %
Device power loss
8.35 W
Inrush current
13.6 A
Max. ECG no. on circuit breaker 10 A (B)
15
Max. ECG no. on circuit breaker 10 A (C)
23
Max. ECG no. on circuit breaker 16 A (B)
23
Max. ECG no. on circuit breaker 16 A (C)
36
Max. ECG no. on circuit breaker 25 A (B)
-
Surge capability (L/N-Ground)
2 kV
Surge capability (L-N)
1 kV
Nominal output voltage
23…54 V
Nominal output current
900 / 1050 / 1100 / 1200 mA
Output ripple current (100 Hz)
< 5 %
Output PSTLM
≤1
Output SVM
≤0.4
Nominal output power
20.7…61.2 W
Maximum output power
61.2 W
Total harmonic distortion
< 15 %
Output current tolerance
±7.5 %
U-OUT (working voltage)
< 60 V
Dimensions & weight
Mounting hole spacing, length
200.0 mm
Product weight
139.50 g
Cable cross-section, input side
0.5…1.5 / 0.75…1.5 mm²
Cable cross-section, output side
0.5…1.5 / 0.75…1.5 mm²
Wire preparation length, input side
7…8 mm
Width
30.0 mm
Wire preparation length, output side
7…8 mm
Height
21.0 mm
Length
210.0 mm
Colors & materials
Casing material
Metal
Temperatures & operating conditions
Ambient temperature range
-25…+50 °C
Maximum temperature at tc test point
75 °C
Max.housing temperature in case of fault
110 °C
Temperature range at storage
-25…80 °C
Permitted rel. humidity during operation
5…85 %
Lifespan
ECG lifetime
50000 / 100000 h
Additional product data
Encapsulated
No
Predecessor EAN
4052899617445
Capabilities
Dimmable
No
Overheating protection
Automatic reversible
Overload protection
Automatic reversible
Short-circuit protection
Automatic reversible
No-load proof
Yes
Intended for no-load operation
No
Max. cable length to lamp/LED module
2.0 m
Suitable for fixtures with prot. class
I / II
Number of channels
1
Control interface
-
Programming
Tuner4TRONIC
No
Certificates & standards
Approval marks – approval
CE / ENEC / CCC / RCM / BIS / TISI / EAC / UKCA
Standards
Acc. to IEC 61347-1/Acc. to IEC 61347-2-13/Acc. to IEC 62384/Acc. to IEC 61000-3-2/Acc. to IEC 61547/Acc. to IEC 6100-4-5
Type of protection
IP20
Logistical data
Commodity code
85044083900
Environmental information
Information according Art. 33 of EU Regulation (EC) 1907/2006 (REACh)
Date of Declaration
21-11-2023
Primary Article Identifier
4062172212724
Candidate List Substance 1
Lead
CAS No. of substance 1
7439-92-1
Safe Use Instruction
The identification of the Candidate List substance is sufficient to allow safe use of the article.
Declaration No. in SCIP database
af75408d-f894-4804-a4d3-c377606225b3
Packaging information
EAN |
Unit |
Piece |
Dimension l x w x h |
Weight |
Volume |
|---|---|---|---|---|---|
| 4062172212724 |
UNV
| 1 | 210mm x 30mm x 21mm | 140.00g | 0.13dm³ |
| 4062172212731 |
VS
| 20 | 237mm x 162mm x 130mm | 3099.00g | 4.99dm³ |
Downloads
Data sheets
Information about Family
Product family features
- Output current up to 1600 mA
- Output power up to 75 W
- Low THD <15% @ full load
- Input voltage: 220 – 240 VAC
- Ambient temp range ta: -25 to +50 °C
- Wide output voltage range
- Low LF-ripple < 5%
- Very high efficiency up to 87%
- Fixed output (no dimming)
- 5 years guarantee*
Ecodesign regulation information:
Intended for use with LED modules.
The forward voltage of the LED light source shall be within the defined operating window of the control gear in all operating conditions including dimming if applicable.
Separate control gear and light sources must be disposed of at certified disposal companies in accordance with Directive 2012/19/EU (WEEE) in the EU and with Waste Electrical and Electronic Equipment (WEEE) Regulations 2013 in the UK. For this purpose, collection points for recycling centres and take-back systems (CRSO) are available from retailers or private disposal companies, which accept separate control gear and light sources free of charge. In this way, raw materials are conserved and materials are recycled.
Intended for use with LED modules.
The forward voltage of the LED light source shall be within the defined operating window of the control gear in all operating conditions including dimming if applicable.
Separate control gear and light sources must be disposed of at certified disposal companies in accordance with Directive 2012/19/EU (WEEE) in the EU and with Waste Electrical and Electronic Equipment (WEEE) Regulations 2013 in the UK. For this purpose, collection points for recycling centres and take-back systems (CRSO) are available from retailers or private disposal companies, which accept separate control gear and light sources free of charge. In this way, raw materials are conserved and materials are recycled.
Products
| Product |
|
|
|
|
|
Data sheet | ||
|---|---|---|---|---|---|---|---|---|
|
IT FIT 18/220...240/350 CS L
|
23…51 V | 200 / 250 / 300 / 350 mA | NaN mm | NaN mm | 21.0 mm | ||
|
IT FIT 18/220...240/350 CS L
|
23…54 V | 200 / 250 / 300 / 350 mA | 210.0 mm | 30.0 mm | 21.0 mm | ||
|
IT FIT 40/220...240/800 CS L
|
23…54 V | 500 / 600 / 700 / 800 mA | 2100 mm | 300 mm | 210 mm | ||
|
|
IT FIT 60/220...240/1A2 CS L
|
23…54 V | 900 / 1050 / 1100 / 1200 mA | 210.0 mm | 30.0 mm | 21.0 mm | ||
|
IT FIT 75/220...240/1A6 CS L
|
23…54 V | 1300 / 1400 / 1500 / 1600 mA | 280.0 mm | 30.0 mm | 21.0 mm |