IT FIT 75/220...240/550 CS D L
Product family benefits
- Flexible with 1 driver offers 4 output currents
- High quality light with very low ripple
- Very high efficiency
- Enable slim fixture design with flat 21 mm height metal housing
- Long lasting and high reliability
- Non-isolated driver
Areas of application
- Linear and area lighting
- Office, industrial and shop lighting
Technical Data
Electrical data
Nominal input voltage
220…240 V
Mains frequency
50/60 Hz
Input voltage AC
198…264 V
Current set
DipSwitch
Power factor λ
0.94C…0.98
Efficiency in full-load
93 %
Device power loss
5.63 W
Inrush current
30.9 A
Max. ECG no. on circuit breaker 10 A (B)
12
Max. ECG no. on circuit breaker 10 A (C)
19
Max. ECG no. on circuit breaker 16 A (B)
19
Max. ECG no. on circuit breaker 16 A (C)
30
Max. ECG no. on circuit breaker 25 A (B)
-
Surge capability (L/N-Ground)
2 kV
Surge capability (L-N)
1 kV
Nominal output voltage
90…216 V
Nominal output current
350 / 400 / 500 / 550 mA
Output ripple current (100 Hz)
< 5 %
Output PSTLM
≤1
Output SVM
≤0.4
Nominal output power
31.5…75 W
Maximum output power
75 W
Default output current
550 mA
Total harmonic distortion
< 15 %
U-OUT (working voltage)
250 V
Dimensions & weight
Mounting hole spacing, length
200.0 mm
Product weight
129.00 g
Cable cross-section, input side
0.5…1.5 / 0.75…1.5 mm²
Cable cross-section, output side
0.5…1.5 mm²
Wire preparation length, input side
7…8 mm
Width
30.0 mm
Wire preparation length, output side
7…8 mm
Length
210.0 mm
Height
21.0 mm
Colors & materials
Casing material
Metal
Temperatures & operating conditions
Ambient temperature range
-25…+50 °C
Maximum temperature at tc test point
75 °C
Max.housing temperature in case of fault
110 °C
Temperature range at storage
-25…80 °C
Permitted rel. humidity during operation
5…85 %
Lifespan
ECG lifetime
50000 / 100000 h
Additional product data
Encapsulated
No
Predecessor EAN
4052899617414
Capabilities
Dimmable
No
Overheating protection
Automatic reversible
Overload protection
Automatic reversible
Short-circuit protection
Automatic reversible
No-load proof
Yes
Intended for no-load operation
No
Max. cable length to lamp/LED module
2.0 m
Suitable for fixtures with prot. class
I / II
Detection angle (PIR)
-
Detection angle (Light sensor)
-
Number of channels
1
Control interface
-
Programming
Box programming
No
Tuner4TRONIC
No
Tuner4TRONIC Field App
No
Certificates & standards
Approval marks – approval
CE / ENEC / CCC / RCM / BIS / EAC / UKCA / TISI
Standards
Acc. to IEC 61347-1/Acc. to IEC 61347-2-13/Acc. to IEC 62384/Acc. to IEC 61000-3-2/Acc. to IEC 61547/Acc. to IEC 6100-4-5
Type of protection
IP20
Logistical data
Commodity code
85044083900
Environmental information
Information according Art. 33 of EU Regulation (EC) 1907/2006 (REACh)
Date of Declaration
29-11-2023
Primary Article Identifier
4062172212786
Candidate List Substance 1
Lead
CAS No. of substance 1
7439-92-1
Safe Use Instruction
The identification of the Candidate List substance is sufficient to allow safe use of the article.
Declaration No. in SCIP database
1acd9815-8ee5-447f-acaf-64a04b02553d
Packaging information
EAN |
Unit |
Piece |
Dimension l x w x h |
Weight |
Volume |
|---|---|---|---|---|---|
| 4062172212786 |
UNV
| 1 | 210mm x 30mm x 21mm | 129.00g | 0.13dm³ |
| 4062172212793 |
VS
| 20 | 237mm x 162mm x 130mm | 2889.00g | 4.99dm³ |
Downloads
Data sheets
Information about Family
Product family features
- Low THD <15% @ full load
- Input voltage: 220 – 240 VAC
- Ambient temp range ta: -25 to +50 °C
- Wide output voltage range
- Low LF-ripple < 5%
- Fixed output (no dimming)
- 5 years guarantee*
Ecodesign regulation information:
Intended for use with LED modules.
The forward voltage of the LED light source shall be within the defined operating window of the control gear in all operating conditions including dimming if applicable.
Separate control gear and light sources must be disposed of at certified disposal companies in accordance with Directive 2012/19/EU (WEEE) in the EU and with Waste Electrical and Electronic Equipment (WEEE) Regulations 2013 in the UK. For this purpose, collection points for recycling centres and take-back systems (CRSO) are available from retailers or private disposal companies, which accept separate control gear and light sources free of charge. In this way, raw materials are conserved and materials are recycled.
Intended for use with LED modules.
The forward voltage of the LED light source shall be within the defined operating window of the control gear in all operating conditions including dimming if applicable.
Separate control gear and light sources must be disposed of at certified disposal companies in accordance with Directive 2012/19/EU (WEEE) in the EU and with Waste Electrical and Electronic Equipment (WEEE) Regulations 2013 in the UK. For this purpose, collection points for recycling centres and take-back systems (CRSO) are available from retailers or private disposal companies, which accept separate control gear and light sources free of charge. In this way, raw materials are conserved and materials are recycled.
Products
| Product |
|
|
|
|
|
Data sheet | ||
|---|---|---|---|---|---|---|---|---|
|
IT FIT 18/220...240/350 CS D L
|
23…54 V | 200 / 250 / 300 / 350 mA | 210.0 mm | 30.0 mm | 21.0 mm | ||
|
IT FIT 40/220...240/350 CS D L
|
40…120 V | 200 / 250 / 300 / 350 mA | 2100 mm | 300 mm | 210 mm | ||
|
IT FIT 60/220...240/350 CS D L
|
90…175 V | 200 / 250 / 300 / 350 mA | 2100 mm | 300 mm | 210 mm | ||
|
|
IT FIT 75/220...240/550 CS D L
|
90…216 V | 350 / 400 / 500 / 550 mA | 210.0 mm | 30.0 mm | 21.0 mm |