OT FIT 35/220…240/400 D LT2 UF L

Product family benefits
  • Ultra-flat housing (11 mm height) for innovative luminaire designs and applications
  • Flexible and future-proof current setting via NFC and LT2
  • Lifetime: up to 100,000 h (temperature at Tc = 65 °C, max. 10 % failure rate)
  • Higher quality of light thanks to < 1% output ripple current
  • Very high efficiency
  • Fulfill safety requirement due to overload, overtemperature, Hot Plug protection
Areas of application
  • Linear lighting for office, education, industry, storage areas and retail
  • Installation in emergency lighting systems according to IEC 61347-2-13, appendix J
  • Suitable for luminaires of protection class I
German innovation awards 2019 winner

Technical Data

Electrical data

Nominal input voltage

220…240 V

Mains frequency

0/50/60 Hz

Input voltage AC

198…264 V

Input voltage DC

176…276 V

Current set

LEDset2 / NFC

Power factor λ

0.37C...0.96

Efficiency in full-load

93 %

at 230 V, 50 Hz

Device power loss

4.0 W

Inrush current

10 A

Max. ECG no. on circuit breaker 10 A (B)

18

Max. ECG no. on circuit breaker 10 A (C)

-

Max. ECG no. on circuit breaker 16 A (B)

30

Max. ECG no. on circuit breaker 16 A (C)

-

Max. ECG no. on circuit breaker 25 A (B)

-

Surge capability (L/N-Ground)

2 kV

Surge capability (L-N)

1 kV

Nominal output voltage

54…240 V

Nominal output current

75…400 mA

±5%

Output current LEDset open

35 mA

Output current LEDset shorted

75 mA

Default output current

35 mA

LEDset deactivated

Output ripple current (100 Hz)

< 1 %

Output PSTLM

≤1

Output SVM

≤0.4

Nominal output power

4…38 W

Maximum output power

38 W

Galvanic isolation

Non isolated

Total harmonic distortion

< 10 %

Output current tolerance

±5 %

Galvanic isolation primary/secondary

-

U-OUT (working voltage)

< 250 V

Dimensions & weight

Mounting hole spacing, length

350.0 mm

Product weight

180.00 g

Cable cross-section, input side

0.5…1.5 mm²

Cable cross-section, output side

0.5…1.5 mm²

Wire preparation length, input side

8.0…9.0 mm

Width

30.0 mm

Length

360.0 mm

Wire preparation length, output side

8.0…9.0 mm

Height

11.0 mm

+/- 0.55 mm

Colors & materials

Casing material

Metal

Temperatures & operating conditions

Ambient temperature range

-25…+60 °C

Maximum temperature at tc test point

75 °C

Max.housing temperature in case of fault

110 °C

Temperature range at storage

-40…+85 °C

Permitted rel. humidity during operation

5…85 %

Maximum 56 days/year at 85 %

Lifespan

ECG lifetime

100000 / 50000 h

At maximum Tc = 75°C / 10% failure rate / At Tc = 65°C / 10% failure rate

ECG ambient temperature (ta)

50 °C

Temperature at the measuring point tc (°C)

75 °C

ECG lifespan (h)

50000 h

Max. 10% failure rate at tc max and input voltage 230 VAC

Capabilities

Dimmable

No

Overheating protection

Automatic reversible

Overload protection

Automatic reversible

Short-circuit protection

Automatic reversible

No-load proof

Yes

Intended for no-load operation

No

Max. cable length to lamp/LED module

2.0 m

Output wires must be routed as close as possible to each other

Suitable for fixtures with prot. class

I

Suitable for emergency lighting

Yes

Number of channels

1

Programming

Programming device

NFC

Tuner4TRONIC Field App

Yes

Certificates & standards

Approval marks – approval

EL / VDE-ENEC / EAC / CCC / BIS / RCM / CE / VDE-EMC

Standards

Acc. to EN 61347-1/Acc. to EN 61347-2-13/Acc. to EN 62384/Acc. to EN 61000-3-2/Acc. to EN 61000-3-3/Acc. to EN 61547

Type of protection

IP20

Logistical data

Commodity code

850440839000

Environmental information


Information according Art. 33 of EU Regulation (EC) 1907/2006 (REACh)

Date of Declaration

19-05-2023

Primary Article Identifier

4052899590960

Candidate List Substance 1

Lead

CAS No. of substance 1

7439-92-1

Safe Use Instruction

The identification of the Candidate List substance is sufficient to allow safe use of the article.

Declaration No. in SCIP database

1303dfab-3c18-4421-9baf-b59107acae8e

Packaging information

EAN

Unit

Piece

Dimension l x w x h

Weight

Volume

4052899590960 UNV

Unpacked

1
4052899590977 VS

Shipping box

20 385mm x 160mm x 66mm 3717.00g 4.07dm³

Downloads

Accessories optional

Information about Family

Cutting edge design - total design freedom.

High efficiency of up to 93% and wide operating windows of up to 700mA pose the highlights of this LED Driver. The current is programmable by NFC and a low ripple contributes to the lighting quality. A height of only 11mm makes this device suitable for cutting edge luminaire design.
Product family features
  • Line frequency: 0 Hz | 50 Hz | 60 Hz
  • Versatile window driver up to 75 W due to flexible output characteristic
  • Supply voltage: 220…240 V
  • Available with output current range: up to 700 mA
  • Non-isolated drivers
Ecodesign regulation information:
Intended for use with LED modules.
The forward voltage of the LED light source shall be within the defined operating window of the control gear in all operating conditions including dimming if applicable.

Separate control gear and light sources must be disposed of at certified disposal companies in accordance with Directive 2012/19/EU (WEEE) in the EU and with Waste Electrical and Electronic Equipment (WEEE) Regulations 2013 in the UK. For this purpose, collection points for recycling centres and take-back systems (CRSO) are available from retailers or private disposal companies, which accept separate control gear and light sources free of charge. In this way, raw materials are conserved and materials are recycled.

Products

Sort by:
Product
Nominal output voltage
Nominal output current
Length
Width
Height
Data sheet
OT FIT 35/220…240/400 D LT2 UF L
54…240 V 75…400 mA 360.0 mm 30.0 mm 11.0 mm
OT FIT 75/220…240/700 D LT2 UF L
54…240 V 150…700 mA 360.0 mm 30.0 mm 11.0 mm