OT FIT 75/220...240/1A4 NFC L
Product family benefits
- Flexible and future-proof current setting via NFC (Near Field Communication)
- Lifetime: up to 100,000 h (temperature at Tc = 65 °C, max. 10 % failure rate)
- Fulfilling SVM (≤ 0.4) and PsT (≤ 1.0) standards
- Higher quality of light thanks to < 1% output ripple current
- Very high efficiency
- Fulfill safety requirement due to overload, overtemperature protection
Areas of application
- Linear lighting for office, education, industry, storage areas and retail
- Installation in emergency lighting systems according to IEC 61347-2-13, appendix J
- Suitable for luminaires of protection class I
Technical Data
Electrical data
Nominal input voltage
220…240 V
Mains frequency
50/60 Hz
Input voltage AC
198…264 V
Input voltage DC
176…276 V
Current set
NFC
Power factor λ
0.84C...0.98
Efficiency in full-load
90 %
Device power loss
7.0 W
Inrush current
≤ 40 A
Max. ECG no. on circuit breaker 10 A (B)
8
Max. ECG no. on circuit breaker 10 A (C)
-
Max. ECG no. on circuit breaker 16 A (B)
13
Max. ECG no. on circuit breaker 16 A (C)
-
Max. ECG no. on circuit breaker 25 A (B)
-
Surge capability (L/N-Ground)
2 kV
Surge capability (L-N)
1 kV
Nominal output voltage
20…51 V
Nominal output current
600…1400 mA
Output PSTLM
≤1
Output SVM
≤0.4
Nominal output power
29…72 W
Maximum output power
72 W
Dimensions & weight
Mounting hole spacing, length
270.0 mm
Product weight
200.00 g
Cable cross-section, input side
0.5…1.5 mm²
Wire preparation length, input side
8.0…9.0 mm
Length
280.0 mm
Wire preparation length, output side
8.0…9.0 mm
Height
21.0 mm
Width
30.0 mm
Colors & materials
Casing material
Metal
Temperatures & operating conditions
Ambient temperature range
-25…+50 °C
Maximum temperature at tc test point
75 °C
Max.housing temperature in case of fault
110 °C
Temperature range at storage
-40…+85 °C
Permitted rel. humidity during operation
5…85 %
Lifespan
ECG lifetime
100000 h
Capabilities
Dimmable
No
Overheating protection
Automatic reversible
Overload protection
Automatic reversible
Short-circuit protection
Automatic reversible
No-load proof
Yes
Intended for no-load operation
No
Max. cable length to lamp/LED module
2.0 m
Suitable for fixtures with prot. class
I
Number of channels
1
Suitable for emergency lighting
Yes
Programming
Programming device
FEIG
Box programming
Yes
Certificates & standards
Approval marks – approval
CE / VDE-ENEC / EAC / CCC / BIS / RCM
Standards
Acc. to IEC 61347-1/Acc. to IEC 61347-2-13/Acc. to IEC 62384/Acc. to IEC 62386/Acc. to IEC 61000-3-2/Acc. to IEC 61000-3-3/Acc. to IEC 61547
Type of protection
IP20
Logistical data
Commodity code
85044083900
Environmental information
Information according Art. 33 of EU Regulation (EC) 1907/2006 (REACh)
Date of Declaration
24-05-2023
Primary Article Identifier
4062172064040
Candidate List Substance 1
Lead
CAS No. of substance 1
7439-92-1
Safe Use Instruction
The identification of the Candidate List substance is sufficient to allow safe use of the article.
Declaration No. in SCIP database
02abfbc1-1667-4d08-9c86-d36cbdb0f6a7
Packaging information
EAN |
Unit |
Piece |
Dimension l x w x h |
Weight |
Volume |
|---|---|---|---|---|---|
| 4062172064040 |
UNV
| 1 | 280mm x 30mm x 21mm | 200.00g | 0.18dm³ |
| 4062172211833 |
VS
| 10 | 309mm x 120mm x 78mm | 2101.00g | 2.89dm³ |
Downloads
Data sheets
Accessories optional
Information about Family
Product family features
- Line frequency: 0 Hz | 50 Hz | 60 Hz
- Versatile scope of application due to output power range of up to 75 W
- Constant Lumen Output (CLO)
- Supply voltage: 220…240 V
- Available with output current range: up to 1,400 mA
- SELV driver
Ecodesign regulation information:
Intended for use with LED modules.
The forward voltage of the LED light source shall be within the defined operating window of the control gear in all operating conditions including dimming if applicable.
Separate control gear and light sources must be disposed of at certified disposal companies in accordance with Directive 2012/19/EU (WEEE) in the EU and with Waste Electrical and Electronic Equipment (WEEE) Regulations 2013 in the UK. For this purpose, collection points for recycling centres and take-back systems (CRSO) are available from retailers or private disposal companies, which accept separate control gear and light sources free of charge. In this way, raw materials are conserved and materials are recycled.
Intended for use with LED modules.
The forward voltage of the LED light source shall be within the defined operating window of the control gear in all operating conditions including dimming if applicable.
Separate control gear and light sources must be disposed of at certified disposal companies in accordance with Directive 2012/19/EU (WEEE) in the EU and with Waste Electrical and Electronic Equipment (WEEE) Regulations 2013 in the UK. For this purpose, collection points for recycling centres and take-back systems (CRSO) are available from retailers or private disposal companies, which accept separate control gear and light sources free of charge. In this way, raw materials are conserved and materials are recycled.
Products
| Product |
|
|
|
|
|
Data sheet | ||
|---|---|---|---|---|---|---|---|---|
|
|
OT FIT 25/220...240/500 NFC L
|
20…51 V | 170…500 mA | 280.0 mm | 30.0 mm | 21.0 mm | ||
|
|
OT FIT 35/220...240/700 NFC L
|
20…51 V | 250…700 mA | 280.0 mm | 30.0 mm | 21.0 mm | ||
|
|
OT FIT 55/220...240/1A0 NFC L
|
20…51 V | 400…1050 mA | 280.0 mm | 30.0 mm | 21.0 mm | ||
|
|
OT FIT 75/220...240/1A4 NFC L
|
20…51 V | 600…1400 mA | 280.0 mm | 30.0 mm | 21.0 mm |