PL-FLAT-AC MA-G3 1500-840
Product family benefits
- Touch protection accessory for simple use in luminaires
- High reliability
- Easy to use
- Optimised design for simple thermal management
- Enables thin and efficient luminaire designs
- High quality of light thanks to low modulation
- 5 year guarantee
Areas of application
- Corridors
- Stairways
- Landings
- Hallways
References / Links
For more information on the multi-level guarantee and the terms and conditions of the guarantee visit https://www.inventronics-light.com/multilevel-guarantees
Technical Data
Electrical data
Nominal voltage
230 V
Input voltage range
220 240 V
Type of current
AC
Output PSTLM
≤1
Output SVM
≤0.9
Input voltage DC
176 276 V
Inrush current
1,45 A
Max. ECG no. on circuit breaker 10 A (B)
147
Max. ECG no. on circuit breaker 16 A (B)
235
Displacement factor (cos φ1)
0.98
Energy consumption in on-mode
12.0 kWh/1000h
Input voltage AC
220 240 V
Mains frequency
0/50/60 Hz
On-mode power
12.00 W
Photometrical data
Luminous efficacy
120 lm/W
Correlated color temperature CCT
4000 K
Color rendering index Ra
80
Useful luminous flux (Φuse)
1420 lm
Colour consistency (McAdam ellipses)
3
Light color (designation)
Neutral White
Light technical data
Starting time
< 05 s
Warm-up time (60 %)
< 200 s
Beam angle
0 °
Dimensions & weight
Diameter
1700 mm
Product weight
10500 g
Length
170.0 mm
Width
165.0 mm
Height
14.6 mm
Temperatures & operating conditions
Performance temp. acc. to IEC 62717
75 °C
Maximum temperature at tc test point
90 °C
Ambient temperature range
-20 +50 °C
Lifespan
Number of switching cycles
100000
L70B50 lifetime
50000 h
Lumen maintenance factor LMF
96
Additional product data
Predecessor EAN
4052899969780
Lighting technology used
LED
Capabilities
Dimmable
Yes
Certificates & standards
Standards
CE/ENEC/UKCA/VDE
Energy efficiency class
E
Type of protection
IP20
Logistical data
Commodity code
85395100000
Environmental information
Information according Art. 33 of EU Regulation (EC) 1907/2006 (REACh)
Date of Declaration
21-04-2023
Primary Article Identifier
4062172209328
Candidate List Substance 1
Lead
CAS No. of substance 1
7439-92-1
Safe Use Instruction
The identification of the Candidate List substance is sufficient to allow safe use of the article.
Declaration No. in SCIP database
d8ba1db8-022c-49f1-9f09-43d87e24d671
Packaging information
EAN |
Unit |
Piece |
Dimension l x w x h |
Weight |
Volume |
---|---|---|---|---|---|
4062172209328 |
UNV
| 1 | 105.00g | ||
4062172209335 |
VS
| 20 | 457mm x 331mm x 223mm | 3360.00g | 33.73dm³ |
Downloads
Accessories optional
Information about Family
Beautiful thin wall and ceiling luminaires with homogeneous lid surface.
This device offers a variety in lighting: from DALI or Phase cut dimmable to HF detectors and emergency lighting. An integrated LED driver into the LED board and a touch protection accessory for a simple use in luminaires are some special features.
This device offers a variety in lighting: from DALI or Phase cut dimmable to HF detectors and emergency lighting. An integrated LED driver into the LED board and a touch protection accessory for a simple use in luminaires are some special features.
Product family features
- Master with integrated RF sensor (motion, dimming, auto off at daylight)
- Master Slave system with up to 11 luminaires and up to 5 Masters
- Designed for wall and ceiling luminaires with diffuse light distribution
- Low-cost LED replacement of CFL wall-, and ceiling luminaires
- Driver integrated on LED board
- Available diameter: 170 mm, 240 mm
- Available with color temperature: 3,000 K or 4,000 K
- Available with luminous flux: 1,500 lm, 2,500 lm
- LED module is reinforced isolated to mounting surface
- Photobiological safety according to IEC/TR 62778, risk group RG1
Ecodesign regulation information:
Separate control gear and light sources must be disposed of at certified disposal companies in accordance with Directive 2012/19/EU (WEEE) in the EU and with Waste Electrical and Electronic Equipment (WEEE) Regulations 2013 in the UK. For this purpose, collection points for recycling centres and take-back systems (CRSO) are available from retailers or private disposal companies, which accept separate control gear and light sources free of charge. In this way, raw materials are conserved and materials are recycled.
Separate control gear and light sources must be disposed of at certified disposal companies in accordance with Directive 2012/19/EU (WEEE) in the EU and with Waste Electrical and Electronic Equipment (WEEE) Regulations 2013 in the UK. For this purpose, collection points for recycling centres and take-back systems (CRSO) are available from retailers or private disposal companies, which accept separate control gear and light sources free of charge. In this way, raw materials are conserved and materials are recycled.
Products
Product |
|
|
Data sheet | ||
---|---|---|---|---|---|
PL-FLAT-AC MA-G3 1500-830
|
230 V | 1700 mm | |||
PL-FLAT-AC MA-G3 1500-840
|
230 V | 1700 mm |