Product family features
  • Corridor function for direct connection of ECG to common motion sensor
  • Corridor function with pre-programmed light program
  • Touch DIM function for free parameterization of light value and turn on time
  • Fit for SMART GRID for feedback of consumed mains power and lamp operating hours
  • Fit for emergency function for automatic detection of emergency lighting by ECG
  • Very low standby power consumption: < 0.5 W
  • Lifetime: > 100,000 h (for T = 65 °C at Tc)
  • Very high number of switching cycles: up to 300,000
  • Dimming range: 1…100 % (3…100 % with compact fluorescent lamp)
  • POWER2LAMP function for optimal matching of ECG power to lamp during lamp lifetime
  • Line frequency: 0 Hz, 50…60 Hz, rectified AC
Product family benefits
  • System+ Guarantee available
  • Easy integration in luminaire thanks to same dimensions like DALI GI ECG
  • TouchDIM function for easy and inexpensive dimming of several ECGs
  • Same luminous flux with direct and alternating current
  • Dimming of amalgam lamps without flickering or reduced lifespan
  • Automatic restart after lamp replacement
DALI product features
  • Control via the DALI interface
  • Compliance with the DALI Version-1 and IEC 60929
  • Control input protected against overvoltage and polarity reversal (OSRAM ECG)
Touch DIM and Touch DIM Sensor function
  • Manual dimming without controller and with standard switches
  • Including memory function (double click) and soft start


Sort by:
Dimming interface
Dimming range
Data sheet
21.0 mm Yes 30.0 mm DALI / Touch DIM / Touch DIM Sensor 1…100 %
21.0 mm Yes 40.0 mm DALI / Touch DIM / Touch DIM Sensor 1…100 %
21.0 mm Yes 40.0 mm DALI / Touch DIM / Touch DIM Sensor 1…100 %

Information about Family

If you need to install or modernize a lighting system with T8 lamps, the QUICKTRONIC INTELLIGENT DALI DIM T8 is an excellent option. It provides extensive DALI and TouchDIM functionalities, corridor function and a dimming range from 1 %...100 % (3 %...100 % with CFL). It is fit for SMART GRID, has a Fit for Emergency function and permits a very high number of switching cycles. Use QUICKTRONIC INTELLIGENT DALI DIM T8 with luminaires of protection class I for emergency lighting per EN 50172/DIN VDE 0108-100 and IEC 61347-2-3, appendix J, and for industrial lighting, office lighting, strip lighting, public buildings, factories, sports halls, corridors and storage rooms. This ECG’s many benefits include easy integration into luminaires, because it has the same dimensions as the DALI GI ECG, it also allows the dimming of amalgam lamps without harm or reduction in lamp life and provides automatic restart after lamp replacement.
Areas of application
  • Suitable for use in emergency lighting systems as per EN 50172/DIN VDE 0108-100
  • Installation in emergency lighting systems according to IEC 61347-2-3, appendix J
  • Industry
  • Open-plan offices, corridors and storage rooms
  • Public buildings
  • Sports halls and factories
  • Strip lighting
  • Suitable for luminaires of protection class I

References / Links
For more information on the system guarantee and the terms and conditions of the guarantee visit https://www.inventronics-light.com/multilevel-guarantees

Ecodesign regulation information:
Separate control gear and light sources must be disposed of at certified disposal companies in accordance with Directive 2012/19/EU (WEEE) in the EU and with Waste Electrical and Electronic Equipment (WEEE) Regulations 2013 in the UK. For this purpose, collection points for recycling centres and take-back systems (CRSO) are available from retailers or private disposal companies, which accept separate control gear and light sources free of charge. In this way, raw materials are conserved and materials are recycled.