OT FIT 300/220...240/1A6 D NFC IND L

Product family benefits

Flexible and future-proof current setting via NFC and LT2
Lifetime: up to 100,000 h (temperature at T_c = 75 °C, max. 10 % failure rate)
Wide operating temperature range: -40…+65 °C
High quality of light thanks to <1% output ripple current
High surge protection: up to 4 kV (L-N) / 4 kV (L/N-PE)
Very high efficiency (up to 96%)
Integrated inrush current limiter
Fulfill safety requirement due to overload, overtemperature, Hot Plug protection

Areas of application

Linear lighting solutions for industry, storage areas and retail applications
Installation in emergency lighting systems according to IEC 61347-2-13, appendix J
Suitable for installation in emergency lighting systems according to EN 60598-2-22
Suitable for luminaires of protection class I

Data sheet

More downloads

Technical Data

Electrical data

Nominal input voltage

220…240 V

Mains frequency

0/50/60 Hz

Input voltage AC

198…264 V

Input voltage DC

176…276 V

Current set

NFC / LEDset

Power factor λ

0.69C…0.99

Efficiency in full-load

96 %

Device power loss

16 W

Inrush current

≤ 6 A

Max. ECG no. on circuit breaker 10 A (B)

Max. ECG no. on circuit breaker 10 A (C)

Max. ECG no. on circuit breaker 16 A (B)

Max. ECG no. on circuit breaker 16 A (C)

Max. ECG no. on circuit breaker 25 A (B)

Surge capability (L/N-Ground)

4 kV

Surge capability (L-N)

4 kV

Nominal output voltage

60…300 V

Nominal output current

250...1550 mA

Default output current

250 mA

Output ripple current (100 Hz)

≤ 1 %

Output PSTLM

≤1

Output SVM

≤0.4

Nominal output power

40…300 W

Maximum output power

300 W

Galvanic isolation

Non isolated

Total harmonic distortion

7 %

Dimensions & weight

Mounting hole spacing, length

340.0 mm

Product weight

450.00 g

Cable cross-section, input side

0.5…1.5 mm²

Cable cross-section, output side

0.5…1.5 mm²

Wire preparation length, input side

8.5…9.5 mm

Height

28.0 mm

Width

46.0 mm

Wire preparation length, output side

8.5…9.5 mm

Length

360.0 mm

Colors & materials

Casing material

Metal

Temperatures & operating conditions

Ambient temperature range

-40…+65 °C

Maximum temperature at tc test point

85 °C

Max.housing temperature in case of fault

110 °C

Temperature range at storage

-40…+85 °C

Permitted rel. humidity during operation

5…85 %

Lifespan

ECG lifetime

100000 h

Additional product data

Encapsulated

Capabilities

Dimmable

Overheating protection

Yes

Overload protection

Yes

Short-circuit protection

Yes

No-load proof

Yes

Intended for no-load operation

Max. cable length to lamp/LED module

3.0 m

Suitable for fixtures with prot. class

Detection angle (Light sensor)

Suitable for emergency lighting

Yes

Number of channels

Control interface

Detection angle (PIR)

Programming

Programming device

FEIG

Box programming

Yes

Tuner4TRONIC

Yes

Tuner4TRONIC Field App

Yes

Certificates & standards

Approval marks – approval

CE / VDE-ENEC / EAC / CCC / BIS / RCM

Standards

Acc. to IEC 61347-1/Acc. to IEC 61347-2-13/Acc. to IEC 62384/Acc. to IEC 62386/Acc. to IEC 61000-3-2/Acc. to IEC 61000-3-3/Acc. to IEC 61547

Type of protection

IP20

Logistical data

Commodity code

850440839000

Environmental information

Information according Art. 33 of EU Regulation (EC) 1907/2006 (REACh)

Date of Declaration

26-05-2023

Primary Article Identifier

4062172186179

Candidate List Substance 1

Lead

CAS No. of substance 1

7439-92-1

Safe Use Instruction

The identification of the Candidate List substance is sufficient to allow safe use of the article.

Declaration No. in SCIP database

5eb2261f-bc3b-4e13-bfa0-573aa1f260d7

Packaging information

EAN	Unit	Piece	Dimension l x w x h	Weight	Volume
4062172186179	UNV Unpacked	1	360mm x 46mm x 28mm	450.00g	0.46dm³
4062172186186	VS Shipping box	10	385mm x 152mm x 107mm	4655.00g	6.26dm³

Downloads

Data sheets

Family data sheet

Data sheet

OPTOTRONIC LED Power Supply

User instruction

Size: 3 MB

OT FIT 300 D NFC IND L IGS 301120

CAD data

Size: 1.3 MB

OT FIT 300 D NFC IND L STEP 301120

CAD data

Size: 1.1 MB

OT FIT 300 D NFC IND L CAD2PDF 301120

CAD Data 2-dim

Size: 84.7 kB

OT FIT 300 D NFC IND L CAD3PDF 301120

CAD data 3-dim

Size: 203.6 kB

OT FIT D NFC IND L UK DoC 4281285 220322

Mandatory Publications

Size: 224.2 kB

OT FIT D NFC IND L CE 3695761 230322

Mandatory Publications

Size: 227.7 kB

Accessories optional

Information about Family

Peace of mind – robust, lasting, efficient.

An integrated CLO contributes to maximizing the energy efficiency and very low LF and HF ripple help avoiding machine disturbances. CLO and currents are programmable by NFC and LT2 and the device also features an integrated inrush current limiter.

Product family features

Line frequency: 0 Hz | 50 Hz | 60 Hz
Versatile scope of application due to output power range of up to 300 W
Supply voltage: 220…240 V
Available with output current range: up to 1,600 mA
Constant Lumen Output (CLO)
Non-isolated drivers

Ecodesign regulation information:
Intended for use with LED modules.
The forward voltage of the LED light source shall be within the defined operating window of the control gear in all operating conditions including dimming if applicable.

Separate control gear and light sources must be disposed of at certified disposal companies in accordance with Directive 2012/19/EU (WEEE) in the EU and with Waste Electrical and Electronic Equipment (WEEE) Regulations 2013 in the UK. For this purpose, collection points for recycling centres and take-back systems (CRSO) are available from retailers or private disposal companies, which accept separate control gear and light sources free of charge. In this way, raw materials are conserved and materials are recycled.

Products

Sort by:
	Product	Nominal output voltage	Nominal output current	Length	Width	Height	Data sheet
	OT FIT 150/220…240/1A0 D NFC IND L	64…300 V	250…1000 mA	360.0 mm	30.0 mm	21.0 mm
	OT FIT 300/220...240/1A6 D NFC IND L	60…300 V	250...1550 mA	360.0 mm	46.0 mm	28.0 mm