PL-FLAT-AC MA-G3 2500-830
Product family benefits
- Touch protection accessory for simple use in luminaires
- High reliability
- Easy to use
- Optimised design for simple thermal management
- Enables thin and efficient luminaire designs
- High quality of light thanks to low modulation
- 5 year guarantee
Areas of application
- Corridors
- Stairways
- Landings
- Hallways
References / Links
For more information on the multi-level guarantee and the terms and conditions of the guarantee visit https://www.inventronics-light.com/multilevel-guarantees
Technical Data
Electrical data
Nominal voltage
230 V
Input voltage range
220 240 V
Type of current
AC
Output PSTLM
≤1
Inrush current
1,62 A
Max. ECG no. on circuit breaker 10 A (B)
88
Max. ECG no. on circuit breaker 16 A (B)
141
Displacement factor (cos φ1)
0.98
Energy consumption in on-mode
20.0 kWh/1000h
Input voltage AC
220 240 V
On-mode power
20.00 W
Output SVM
≤0.9
Mains frequency
0/50/60 Hz
Input voltage DC
176 276 V
Photometrical data
Luminous efficacy
117 lm/W
Light color (designation)
Warm White
Correlated color temperature CCT
3000 K
Useful luminous flux (Φuse)
2350 lm
Colour consistency (McAdam ellipses)
3
Color rendering index Ra
80
Light technical data
Starting time
< 0.5 s
Warm-up time (60 %)
< 2.00 s
Beam angle
115 °
Dimensions & weight
Diameter
240.0 mm
Product weight
180.00 g
Width
235.0 mm
Length
240.0 mm
Height
14.6 mm
Temperatures & operating conditions
Performance temp. acc. to IEC 62717
75 °C
Maximum temperature at tc test point
90 °C
Ambient temperature range
-20 +50 °C
Lifespan
Number of switching cycles
100000
L70B50 lifetime
50000 h
Lumen maintenance factor LMF
96
Additional product data
Predecessor EAN
4052899969797
Lighting technology used
LED
Capabilities
Dimmable
No
Certificates & standards
Standards
CE/ENEC/UKCA/VDE
Energy efficiency class
E
Type of protection
IP20
Logistical data
Commodity code
85395100000
Environmental information
Information according Art. 33 of EU Regulation (EC) 1907/2006 (REACh)
Date of Declaration
21-07-2023
Primary Article Identifier
4062172203302
Candidate List Substance 1
Lead
CAS No. of substance 1
7439-92-1
Safe Use Instruction
The identification of the Candidate List substance is sufficient to allow safe use of the article.
Declaration No. in SCIP database
9b97632d-416c-438b-a4d6-31f9153007e5
Downloads
Accessories optional
Information about Family
Beautiful thin wall and ceiling luminaires with homogeneous lid surface.
This device offers a variety in lighting: from DALI or Phase cut dimmable to HF detectors and emergency lighting. An integrated LED driver into the LED board and a touch protection accessory for a simple use in luminaires are some special features.
This device offers a variety in lighting: from DALI or Phase cut dimmable to HF detectors and emergency lighting. An integrated LED driver into the LED board and a touch protection accessory for a simple use in luminaires are some special features.
Product family features
- Master with integrated RF sensor (motion, dimming, auto off at daylight)
- Master Slave system with up to 11 luminaires and up to 5 Masters
- Designed for wall and ceiling luminaires with diffuse light distribution
- Low-cost LED replacement of CFL wall-, and ceiling luminaires
- Driver integrated on LED board
- Available diameter: 170 mm, 240 mm
- Available with color temperature: 3,000 K or 4,000 K
- Available with luminous flux: 1,500 lm, 2,500 lm
- LED module is reinforced isolated to mounting surface
- Photobiological safety according to IEC/TR 62778, risk group RG1
Ecodesign regulation information:
Separate control gear and light sources must be disposed of at certified disposal companies in accordance with Directive 2012/19/EU (WEEE) in the EU and with Waste Electrical and Electronic Equipment (WEEE) Regulations 2013 in the UK. For this purpose, collection points for recycling centres and take-back systems (CRSO) are available from retailers or private disposal companies, which accept separate control gear and light sources free of charge. In this way, raw materials are conserved and materials are recycled.
Separate control gear and light sources must be disposed of at certified disposal companies in accordance with Directive 2012/19/EU (WEEE) in the EU and with Waste Electrical and Electronic Equipment (WEEE) Regulations 2013 in the UK. For this purpose, collection points for recycling centres and take-back systems (CRSO) are available from retailers or private disposal companies, which accept separate control gear and light sources free of charge. In this way, raw materials are conserved and materials are recycled.
Products
Product |
|
|
Data sheet | ||
---|---|---|---|---|---|
PL-FLAT-AC MA-G3 1500-830
|
230 V | 1700 mm | |||
PL-FLAT-AC MA-G3 1500-840
|
230 V | 1700 mm | |||
PL-FLAT-AC MA-G3 2500-830
|
230 V | 240.0 mm | |||
PL-FLAT-AC MA-G3 2500-840
|
230 V | 240.0 mm |