QT-FIT8 2X18
Product family benefits
- Long lamp life
- No adverse effect from frequent on/off switching
- Automatic restart after lamp replacement
- Perfect lamp start for applications with motion sensors
- VDE/VDE EMC certified system
- Very high energy efficiency due to cut-off technology
Areas of application
- Open-plan offices, corridors and storage rooms
- Public buildings
- Strip lighting
- Suitable for luminaires of protection class I
Technical Data
Electrical data
Input voltage AC
198…264 V
Nominal voltage
220…240 V
Mains frequency
50…60 Hz
Input voltage DC
185…264 V
Maximum output power
2 x 18 W
Efficiency in full-load
87 %
Operating frequency
40…50 kHz
Max. ECG no. on circuit breaker 10 A (B)
17
Max. ECG no. on circuit breaker 16 A (B)
28
Inrush current
15 A
Light technical data
Starting time
2.0 s
Dimensions & weight
Length
360.0 mm
Width
30.0 mm
Height
28.0 mm
Mounting hole spacing, length
350.0 mm
Product weight
233.00 g
Cable cross-section, input side
0.5…1.5 mm²
Cable cross-section, output side
0.5…1.5 mm²
Temperatures & operating conditions
Ambient temperature range
-15…+50 °C
Permitted rel. humidity during operation
5…85 %
Lifespan
ECG lifetime
50000 h
Additional product data
Suitable for lamp power (2 lamps)
18 W
Capabilities
End of lamp life safety shutdown
EOL T.2
Suitable for fixtures with prot. class
I
Intended for no-load operation
No
Dimmable
No
Max. cable length to lamp/LED module
2.0 m / 1.0 m
Certificates & standards
Approval marks – approval
VDE / VDE-EMC / ENEC 10 / CE
EEI – Energy Label
A2
Standards
Acc. to EN 61347-2-3/Acc. to EN 60929/Acc. to EN 55015:2006 + A1:2007/Acc. to EN 61000-3-2/Acc. to EN 61547
Type of protection
IP20
Protection class
I
Logistical data
Commodity code
85041080900
Environmental information
Information according Art. 33 of EU Regulation (EC) 1907/2006 (REACh)
Date of Declaration
26-05-2023
Primary Article Identifier
4008321294241
Candidate List Substance 1
Lead
CAS No. of substance 1
7439-92-1
Safe Use Instruction
The identification of the Candidate List substance is sufficient to allow safe use of the article.
Declaration No. in SCIP database
67a7f252-adca-4805-b45e-00cb8cb0bb62
Packaging information
EAN |
Unit |
Piece |
Dimension l x w x h |
Weight |
Volume |
|---|---|---|---|---|---|
| 4008321294241 |
UNV
| 1 | 360mm x 30mm x 28mm | 233.00g | 0.30dm³ |
| 4008321294258 |
VS
| 20 | 391mm x 131mm x 161mm | 5271.00g | 8.25dm³ |
Downloads
Data sheets
Lamp-ECG Combination
L 18 W
Nominal current
0.16 A
Nominal wattage + Power loss
36.00 W
Power factor λ [PIM]
0.98
Luminous flux at 35 °C
1350 lm
Number of lighting outlets
2
Information about Family
If you are upgrading an existing system, or creating a new light installation with T8 lamps, consider the QUICKTRONIC FIT 8 ECG. It has lamp start with optimum filament preheating, an energy efficiency index of A2 and automatic shutoff of defective lamps and at end of life, and you can use it with luminaires of protection class I for open plan office lighting, corridors, storage rooms, strip lighting and in public buildings. If your LMS uses motion sensors, this ECcG will give you perfect lamp start, and withstand frequent on/off switching. The QUICKTRONIC FIT 8 ECG for T8 lamps enhances lamp life, provides automatic restart after lamp replacement, and is highly energy efficient thanks to its cutoff technology. This ECG has a VDE/VDE MC certified system, assuring you of its quality.
Product family features
- Supply voltage: 220…240 V
- Line voltage: 198…264 V
- Line frequency: 50 Hz | 60 Hz
- Lamp start with optimum filament preheating
- Energy Efficiency Index EEI: A2
- Automatic shutdown of defective lamps and at end of life (EoL T.2)
- Lamp operation: to EN 60929
- Safety: to EN 61347-2-3
Ecodesign regulation information:
Separate control gear and light sources must be disposed of at certified disposal companies in accordance with Directive 2012/19/EU (WEEE) in the EU and with Waste Electrical and Electronic Equipment (WEEE) Regulations 2013 in the UK. For this purpose, collection points for recycling centres and take-back systems (CRSO) are available from retailers or private disposal companies, which accept separate control gear and light sources free of charge. In this way, raw materials are conserved and materials are recycled.
Separate control gear and light sources must be disposed of at certified disposal companies in accordance with Directive 2012/19/EU (WEEE) in the EU and with Waste Electrical and Electronic Equipment (WEEE) Regulations 2013 in the UK. For this purpose, collection points for recycling centres and take-back systems (CRSO) are available from retailers or private disposal companies, which accept separate control gear and light sources free of charge. In this way, raw materials are conserved and materials are recycled.
Products
| Product |
|
|
|
|
|
Data sheet | ||
|---|---|---|---|---|---|---|---|---|
|
QT-FIT8 1X18
|
28.0 mm | No | 50000 h | 280.0 mm | 30.0 mm | ||
|
QT-FIT8 1X36
|
28.0 mm | No | 50000 h | 280.0 mm | 30.0 mm | ||
|
QT-FIT8 1X58…70
|
28.0 mm | No | 50000 h | 280.0 mm | 30.0 mm | ||
|
|
QT-FIT8 2X18
|
28.0 mm | No | 50000 h | 360.0 mm | 30.0 mm | ||
|
QT-FIT8 2X36
|
28.0 mm | No | 50000 h | 360.0 mm | 30.0 mm | ||
|
QT-FIT8 2X58…70
|
28.0 mm | No | 50000 h | 360.0 mm | 30.0 mm | ||
|
QT-FIT8 2X58
|
28.0 mm | No | 50000 h | 360.0 mm | 30.0 mm | ||
|
QT-FIT8 3X18,4X18
|
28.0 mm | No | 50000 h | 280.0 mm | 40.0 mm | ||
|
QT-FIT8 3X36
|
28.0 mm | No | 50000 h | 280.0 mm | 40.0 mm |