Product family features
  • Supply voltage: 220…240 V
  • Line voltage: 198…264 V
  • Line frequency: 0 Hz | 50 Hz | 60 Hz
  • Lamp start with optimum filament preheating
  • Lifetime: > 100,000 h (for T = 65 °C at Tc)
  • Energy Efficiency Index EEI: A2 BAT
  • Automatic shutdown of defective lamps and at end of life (EoL T.2)
  • Safety: to EN 61347-2-3
  • Lamp operation: to EN 60929
Product family benefits
  • Long lamp life
  • No adverse effect from frequent on/off switching
  • Automatic restart after lamp replacement
  • Perfect lamp start for applications with motion sensors
  • VDE/VDE EMC certified system
  • Very high energy efficiency due to cut-off technology


Sort by:
ECG lifetime
Data sheet
QTi 2X14/24/21/39 GII
21.0 mm No 100000 h 360.0 mm 30.0 mm
QTi 2X35/49/80 GII
21.0 mm No 100000 h 424.0 mm 30.0 mm

Information about Family

If you want to upgrade or create a light installation with T5 lamps, the QUICKTRONIC INTELLIGENT ECG may be ideal for your project. It features lamp start with optimum filament preheating, along with automatic shutoff of defective lamps and at the end of life. Supply voltage is 220…240 V and line voltage is 198…264 V. This is an ECG that you can use with emergency lighting systems to EN 50172 / DIN VDE 0108-100, and with luminaires of protection classes I and II. It is great for industrial lighting, open plan office lighting, strip lighting and in sports halls and factories, and you can use it as a replacement ECG when you modernize existing systems. The QUICKTRONIC INTELLIGENT ECG is very robust and can withstand frequent on / off switching, it also provides perfect lamp start for applications with motion sensors, and automatic restart after lamp replacement.
Areas of application
  • Emergency lighting systems acc. to EN 50172 / DIN VDE 0108-100
  • Industry
  • Open-plan offices, corridors and storage rooms
  • Public buildings
  • Sports halls and factories
  • Strip lighting
  • Suitable for emergency lighting (DC operation)
  • Modernization of existing systems
  • Suitable for luminaires of protection classes I and II
Ecodesign regulation information:
Separate control gear and light sources must be disposed of at certified disposal companies in accordance with Directive 2012/19/EU (WEEE) in the EU and with Waste Electrical and Electronic Equipment (WEEE) Regulations 2013 in the UK. For this purpose, collection points for recycling centres and take-back systems (CRSO) are available from retailers or private disposal companies, which accept separate control gear and light sources free of charge. In this way, raw materials are conserved and materials are recycled.