QTi 2X14/24/21/39 GII
Product family benefits
- Long lamp life
- No adverse effect from frequent on/off switching
- Automatic restart after lamp replacement
- Perfect lamp start for applications with motion sensors
- VDE/VDE EMC certified system
- Very high energy efficiency due to cut-off technology
Areas of application
- Emergency lighting systems acc. to EN 50172 / DIN VDE 0108-100
- Industry
- Open-plan offices, corridors and storage rooms
- Public buildings
- Sports halls and factories
- Strip lighting
- Suitable for emergency lighting (DC operation)
- Modernization of existing systems
- Suitable for luminaires of protection classes I and II
Technical Data
Electrical data
Input voltage AC
198…264 V
Nominal voltage
220…240 V
Mains frequency
50…60 Hz
Input voltage DC
176…276 V
Maximum output power
2 x 39 W
Efficiency in full-load
91 %
Operating frequency
42…85 kHz
Max. ECG no. on circuit breaker 10 A (B)
8
Max. ECG no. on circuit breaker 16 A (B)
13
Inrush current
53 A
Light technical data
Starting time
1.0 s
Dimensions & weight
Length
360.0 mm
Width
30.0 mm
Height
21.0 mm
Mounting hole spacing, length
350.0 mm
Product weight
241.10 g
Temperatures & operating conditions
Ambient temperature range
-20…+50 °C
Permitted rel. humidity during operation
5…85 %
Lifespan
ECG lifetime
100000 h
Additional product data
Suitable for lamp power (2 lamps)
14…39 W
Capabilities
Suitable for emergency lighting
Yes
End of lamp life safety shutdown
EOL T.2
Suitable for fixtures with prot. class
I / II
Max. cable length to lamp/LED module
2.0 m / 1.0 m
Dimmable
No
Intended for no-load operation
No
Certificates & standards
Approval marks – approval
VDE / VDE-EMC / ENEC 10 / CE
EEI – Energy Label
A2 BAT
Standards
Acc. to EN 61347-2-3/Acc. to EN 60929/Acc. to EN 55015:2006 + A1:2007/Acc. to EN 61000-3-2/Acc. to EN 61547
Type of protection
IP20
Protection class
II
Logistical data
Commodity code
850410809000
Environmental information
Information according Art. 33 of EU Regulation (EC) 1907/2006 (REACh)
Date of Declaration
26-05-2023
Primary Article Identifier
4008321383396
Candidate List Substance 1
Lead
CAS No. of substance 1
7439-92-1
Safe Use Instruction
The identification of the Candidate List substance is sufficient to allow safe use of the article.
Declaration No. in SCIP database
9f21ef81-30c2-4f83-806e-4af39654e2bf
Packaging information
EAN |
Unit |
Piece |
Dimension l x w x h |
Weight |
Volume |
|---|---|---|---|---|---|
| 4008321383396 |
UNV
| 1 | 254.00g | ||
| 4008321383402 |
VS
| 20 | 392mm x 98mm x 165mm | 5042.39g | 6.34dm³ |
Downloads
Data sheets
Lamp-ECG Combination
DULUX F 36 W
Nominal current
0.29 A
Nominal wattage + Power loss
66.00 W
Power factor λ [PIM]
0.98
Luminous flux at 35 °C
2800 lm
Number of lighting outlets
2
DULUX L 36 W
Nominal current
0.29 A
Nominal wattage + Power loss
68.00 W
Power factor λ [PIM]
0.98
Luminous flux at 35 °C
2800 lm
Number of lighting outlets
2
DULUX L 40 W
Nominal current
0.37 A
Nominal wattage + Power loss
86.00 W
Power factor λ [PIM]
0.98
Luminous flux at 35 °C
3500 lm
Number of lighting outlets
2
FC 22 W
Nominal current
0.21 A
Nominal wattage + Power loss
49.00 W
Power factor λ [PIM]
0.96
Luminous flux at 35 °C
1800 lm
Number of lighting outlets
2
FC 40 W
Nominal current
0.36 A
Nominal wattage + Power loss
88.00 W
Power factor λ [PIM]
0.99
Luminous flux at 35 °C
3200 lm
Number of lighting outlets
2
HE 14 W
Nominal current
0.15 A
Nominal wattage + Power loss
31.00 W
Power factor λ [PIM]
0.95
Luminous flux at 35 °C
1200 lm
Number of lighting outlets
2
ECG_1.1 Ambient temperature for lifespan
40 °C
ECG_1.2 Ambient temperature for lifespan
50 °C
ECG_1.3 Ambient temperature for lifespan
60 °C
ECG_2.1 Tc point temperature for lifespa
50 °C
ECG_2.2 Tc point temperature for lifespa
60 °C
ECG_2.3 Tc point temperature for lifespa
70 °C
ECG_3.1 Temperature dependent lifespan
100000 h
ECG_3.2 Temperature dependent lifespan
100000 h
ECG_3.3 Temperature dependent lifespan
80000 h
HE 21 W
Nominal current
0.20 A
Nominal wattage + Power loss
45.00 W
Power factor λ [PIM]
0.96
Luminous flux at 35 °C
1900 lm
Number of lighting outlets
2
ECG_1.1 Ambient temperature for lifespan
40 °C
ECG_1.2 Ambient temperature for lifespan
50 °C
ECG_1.3 Ambient temperature for lifespan
60 °C
ECG_2.1 Tc point temperature for lifespa
50 °C
ECG_2.2 Tc point temperature for lifespa
60 °C
ECG_2.3 Tc point temperature for lifespa
70 °C
ECG_3.1 Temperature dependent lifespan
100000 h
ECG_3.2 Temperature dependent lifespan
100000 h
ECG_3.3 Temperature dependent lifespan
70000 h
HE 28 W
Nominal current
0.29 A
Nominal wattage + Power loss
63.00 W
Power factor λ [PIM]
0.99
Luminous flux at 35 °C
2650 lm
Number of lighting outlets
2
HE 35 W
Nominal current
0.35 A
Nominal wattage + Power loss
76.00 W
Power factor λ [PIM]
0.96
Luminous flux at 35 °C
3300 lm
Number of lighting outlets
2
HO 24 W
Nominal current
0.23 A
Nominal wattage + Power loss
50.00 W
Power factor λ [PIM]
0.96
Luminous flux at 35 °C
1750 lm
Number of lighting outlets
2
ECG_1.1 Ambient temperature for lifespan
40 °C
ECG_1.2 Ambient temperature for lifespan
50 °C
ECG_1.3 Ambient temperature for lifespan
60 °C
ECG_2.1 Tc point temperature for lifespa
60 °C
ECG_2.2 Tc point temperature for lifespa
65 °C
ECG_2.3 Tc point temperature for lifespa
75 °C
ECG_3.1 Temperature dependent lifespan
100000 h
ECG_3.2 Temperature dependent lifespan
90000 h
ECG_3.3 Temperature dependent lifespan
50000 h
HO 39 W
Nominal current
0.36 A
Nominal wattage + Power loss
81.00 W
Power factor λ [PIM]
0.98
Luminous flux at 35 °C
3100 lm
Number of lighting outlets
2
ECG_1.1 Ambient temperature for lifespan
40 °C
ECG_1.2 Ambient temperature for lifespan
50 °C
ECG_1.3 Ambient temperature for lifespan
60 °C
ECG_2.1 Tc point temperature for lifespa
60 °C
ECG_2.2 Tc point temperature for lifespa
65 °C
ECG_2.3 Tc point temperature for lifespa
75 °C
ECG_3.1 Temperature dependent lifespan
100000 h
ECG_3.2 Temperature dependent lifespan
90000 h
ECG_3.3 Temperature dependent lifespan
50000 h
L 18 W
Nominal current
0.17 A
Nominal wattage + Power loss
37.00 W
Power factor λ [PIM]
0.96
Luminous flux at 35 °C
1350 lm
Number of lighting outlets
2
L 36 W
Nominal current
0.31 A
Nominal wattage + Power loss
70.00 W
Power factor λ [PIM]
0.98
Luminous flux at 35 °C
3200 lm
Number of lighting outlets
2
Information about Family
If you want to upgrade or create a light installation with T5 lamps, the QUICKTRONIC INTELLIGENT ECG may be ideal for your project. It features lamp start with optimum filament preheating, along with automatic shutoff of defective lamps and at the end of life. Supply voltage is 220…240 V and line voltage is 198…264 V. This is an ECG that you can use with emergency lighting systems to EN 50172 / DIN VDE 0108-100, and with luminaires of protection classes I and II. It is great for industrial lighting, open plan office lighting, strip lighting and in sports halls and factories, and you can use it as a replacement ECG when you modernize existing systems. The QUICKTRONIC INTELLIGENT ECG is very robust and can withstand frequent on / off switching, it also provides perfect lamp start for applications with motion sensors, and automatic restart after lamp replacement.
Product family features
- Supply voltage: 220…240 V
- Line voltage: 198…264 V
- Line frequency: 0 Hz | 50 Hz | 60 Hz
- Lamp start with optimum filament preheating
- Lifetime: > 100,000 h (for T = 65 °C at Tc)
- Energy Efficiency Index EEI: A2 BAT
- Automatic shutdown of defective lamps and at end of life (EoL T.2)
- Safety: to EN 61347-2-3
- Lamp operation: to EN 60929
Ecodesign regulation information:
Separate control gear and light sources must be disposed of at certified disposal companies in accordance with Directive 2012/19/EU (WEEE) in the EU and with Waste Electrical and Electronic Equipment (WEEE) Regulations 2013 in the UK. For this purpose, collection points for recycling centres and take-back systems (CRSO) are available from retailers or private disposal companies, which accept separate control gear and light sources free of charge. In this way, raw materials are conserved and materials are recycled.
Separate control gear and light sources must be disposed of at certified disposal companies in accordance with Directive 2012/19/EU (WEEE) in the EU and with Waste Electrical and Electronic Equipment (WEEE) Regulations 2013 in the UK. For this purpose, collection points for recycling centres and take-back systems (CRSO) are available from retailers or private disposal companies, which accept separate control gear and light sources free of charge. In this way, raw materials are conserved and materials are recycled.
Products
| Product |
|
|
|
|
|
Data sheet | ||
|---|---|---|---|---|---|---|---|---|
|
QTi 1X14/24/21/39 GII
|
21.0 mm | No | 100000 h | 360.0 mm | 30.0 mm | ||
|
QTi 1X28/54/35/49 GII
|
21.0 mm | No | 100000 h | 360.0 mm | 30.0 mm | ||
|
QTi 1X35/49/80 GII
|
21.0 mm | No | 100000 h | 360.0 mm | 30.0 mm | ||
|
|
QTi 2X14/24/21/39 GII
|
21.0 mm | No | 100000 h | 360.0 mm | 30.0 mm | ||
|
QTi 2X28/54/35/49 GII
|
21.0 mm | No | 100000 h | 360.0 mm | 30.0 mm | ||
|
QTi 2X35/49/80 GII
|
21.0 mm | No | 100000 h | 424.0 mm | 30.0 mm |