QTi 3X14/24 DIM
- Same luminous flux with direct and alternating current
- Perfect lamp start for applications with motion sensors
- Dimming of amalgam lamps without flickering or reduced lifespan
- Very high efficiency thanks to cut-off technology
- Automatic restart after lamp replacement
- ECGs comply with MINERGIE standard due to very low standby consumption
- Configurable emergency power characteristics
- Suitable for emergency installations
- Industry
- Open-plan offices, corridors and storage rooms
- Public buildings
- Suitable for luminaires of protection class I
Technical Data
Electrical data
Input voltage AC
198…264 V
Nominal voltage
220…240 V
Mains frequency
50…60 Hz
Input voltage DC
154…276 V
Maximum output power
3 x 24 W
Efficiency in full-load
92 %
Operating frequency
40…100 kHz
Max. ECG no. on circuit breaker 10 A (B)
12
Max. ECG no. on circuit breaker 16 A (B)
19
Inrush current
35 A
Light technical data
Starting time
0.6 s
Dimensions & weight
Length
360.0 mm
Width
40.0 mm
Height
21.0 mm
Mounting hole spacing, length
350.0 mm
Product weight
394.00 g
Cable cross-section, input side
0.5…1.5 / 0.5…1.0 mm²
Cable cross-section, output side
0.5…1.5 / 0.5…1.0 mm²
Temperatures & operating conditions
Ambient temperature range
+10…+50 °C
Permitted rel. humidity during operation
5…85 %
Lifespan
ECG lifetime
100000 h
Additional product data
Suitable for lamp power (3 lamps)
14…24 W
Capabilities
Dimming interface
1…10 V
Dimming range
1…100 %
Dimmable
Yes
Overheating protection
Power reduction and switch off at T > 75 °C at the tc point
End of lamp life safety shutdown
EOL T.2
Suitable for fixtures with prot. class
I
Intended for no-load operation
No
Max. cable length to lamp/LED module
1.0 m
Certificates & standards
Approval marks – approval
VDE / VDE-EMC / EL / EAC / RCM / CCC
Standards
Acc. to EN 55015; EN 55022/Acc. to EN 61547/Acc. to EN 61000-3-2
EEI – Energy Label
A1 BAT
Protection class
I
Type of protection
IP20
Logistical data
Commodity code
850410809000
Environmental information
Information according Art. 33 of EU Regulation (EC) 1907/2006 (REACh)
Date of Declaration
14-04-2022
Primary Article Identifier
4008321069719
Candidate List Substance 1
Lead
CAS No. of substance 1
7439-92-1
Safe Use Instruction
The identification of the Candidate List substance is sufficient to allow safe use of the article.
Declaration No. in SCIP database
65e455f2-fb46-424e-8f4d-fce5b895f694
Packaging information
EAN |
Unit |
Piece |
Dimension l x w x h |
Weight |
Volume |
|---|---|---|---|---|---|
| 4008321069719 |
UNV
| 1 | |||
| 4008321069924 |
VS
| 20 | 384mm x 90mm x 237mm | 8672.00g | 8.19dm³ |
Downloads
Lamp-ECG Combination
DULUX F 24 W
Nominal current
0.32 A
Nominal wattage + Power loss
74.00 W
Power factor λ [PIM]
0.99
Luminous flux at 35 °C
1700 lm
Ambient temperature range [PIM] REM
Operation at up to -20 °C for all QTi (DALI) DIM-ECG possible. Lowest dimming position must be limited. Details see technical dimming brochure.
Number of lighting outlets
3
DULUX L 24 W
Nominal current
0.32 A
Nominal wattage + Power loss
73.00 W
Power factor λ [PIM]
0.99
Luminous flux at 35 °C
1800 lm
Ambient temperature range [PIM] REM
Operation at up to -20 °C for all QTi (DALI) DIM-ECG possible. Lowest dimming position must be limited. Details see technical dimming brochure.
Number of lighting outlets
3
FC 22 W
Nominal current
0.32 A
Nominal wattage + Power loss
73.00 W
Power factor λ [PIM]
0.99
Luminous flux at 35 °C
1750 lm
Ambient temperature range [PIM] REM
Operation at up to -20 °C for all QTi (DALI) DIM-ECG possible. Lowest dimming position must be limited. Details see technical dimming brochure.
Number of lighting outlets
3
HE 14 W
Nominal current
0.20 A
Nominal wattage + Power loss
45.30 W
Power factor λ [PIM]
0.97
Luminous flux at 35 °C
1200 lm
Ambient temperature range [PIM] REM
Operation at up to -20 °C for all QTi (DALI) DIM-ECG possible. Lowest dimming position must be limited. Details see technical dimming brochure.
Number of lighting outlets
3
HO 24 W
Nominal current
0.32 A
Nominal wattage + Power loss
74.00 W
Power factor λ [PIM]
0.99
Luminous flux at 35 °C
1750 lm
Ambient temperature range [PIM] REM
Operation at up to -20 °C for all QTi (DALI) DIM-ECG possible. Lowest dimming position must be limited. Details see technical dimming brochure.
Number of lighting outlets
3
Information about Family
- Control via 1…10 V interface
- Supply voltage: 220…240 V
- Line frequency: 0 Hz | 50 Hz | 60 Hz
- Line voltage: 198…264 V
- Dimming range: 1…100 % luminous flux
- Lamp start: within 0.6 s
- Lifetime: > 100,000 h (for T = 65 °C at Tc)
- Automatic shutdown of defective lamps and at end of life (EoL T.2)
- Energy Efficiency Index EEI: A1 BAT
- Overtemperature protection: Thermal management at high tc temperatures
- Safety: to EN 61347-2-3
- Lamp operation: to EN 60929
- RI suppression: to EN 55015:2006+A1:2007+A2:2009/CISPR 15
- Line harmonics according to EN 61000-3-2
- Immunity according to EN 61547
Separate control gear and light sources must be disposed of at certified disposal companies in accordance with Directive 2012/19/EU (WEEE) in the EU and with Waste Electrical and Electronic Equipment (WEEE) Regulations 2013 in the UK. For this purpose, collection points for recycling centres and take-back systems (CRSO) are available from retailers or private disposal companies, which accept separate control gear and light sources free of charge. In this way, raw materials are conserved and materials are recycled.
Products
| Product |
|
|
|
|
|
Data sheet | ||
|---|---|---|---|---|---|---|---|---|
|
QTi 1X14/24 DIM
|
Yes | 30.0 mm | 21.0 mm | 1…10 V | 1…100 % | ||
|
QTi 2X14/24 DIM
|
Yes | 30.0 mm | 21.0 mm | 1…10 V | 1…100 % | ||
|
QTi 2X21/39 DIM
|
Yes | 30.0 mm | 21.0 mm | 1…10 V | 1…100 % | ||
|
|
QTi 3X14/24 DIM
|
Yes | 40.0 mm | 21.0 mm | 1…10 V | 1…100 % | ||
|
QTi 4X14/24 DIM
|
Yes | 40.0 mm | 21.0 mm | 1…10 V | 1…100 % |